帶 EtherNet/IP接口激光測距傳感器

產品名稱：帶 EtherNet/IP接口激光測距傳感器
產品型號：LDM42EI
產品廠商：耶拿
產品文檔：

你添加了1件商品查看購物車

簡單介紹

帶 EtherNet/IP接口激光測距傳感器 LDM42EI

帶 EtherNet/IP接口激光測距傳感器

的詳細介紹

帶 EtherNet/IP接口激光測距傳感器 LDM42EI

The LDM41EI is an optoelectronic distance measuring device for industrial applications with EtherNet/IP interface.
It works contact-free on the principle of comparative phase measurement (amplitude modulation) and facilitates precisely accurate measurement of distances.

Both, the LDM41EI and the LDM42EI distinguish themselves through high precision as well as high independence from the surface of the measuring object. The red, well visible laser beam allows for easy alignment. The LDM42EI has been further developed for fast distance measurements on white surfaces.
Through the integrated EtherNet/IP interface it is possible to read in data of several devices into a control easily.

Applications

Distance measurement and determination of position
Diameter measurement of rolls / coils
Fill level measurement
Position control
Monitoring of safety-relevant parts
Monitoring of lifting plants / lifting height measurement and positioning of elevators
Monitoring and positioning of cranes and conveyor systems

Millimeter precise measurement on various surfaces
High range reflector-less distance measurement
With additional reflectors on the target object measurements over 100 m
Operation in extreme ambient temperatures with high precision and range
High supply voltage range between 10 V and 30 V DC with low power consumption
Safe operation through laser class 2
Easy adjustment through visible laser beam
Common flexible interface cable for supply voltage, switching output and analog output
Direct connection to EtherNet/IP
Controlled by EtherNet/IP control byte
Customized parameterization via PC
Display of measured values in meters, feet, inches and others due to free scaling
Robust, compact housing, easy to install, protection standard IP 65

Measuring range1	0.2 m ... 30 m on almost all natural surfaces, over 100 m achievable depending on the degree of reflection of surfaces
Measuring uncertainty2	±2 mm under defined measuring conditions3 ±3 mm (+15°C ... +30°C) ±5 mm (-10 °C ... +50 °C)
Resolution	0.1 mm, freely scalable
Reproducibility4	0.5 mm
Measuring time	0.24 s ... 6 s adjustable or automatically in mode DT 0.1 s in mode DW on white surface 20 ms in mode DX on white surface (only LDM42EI)
Laser class	Laser class 2 acc. to DIN EN 60825-1:2001-11
Laser divergence5	0.6 mrad
Operating temperature	-10 °C ... +50 °C
Storage temperature	-40 °C ... +70 °C
Supply voltage	10 V ... 30 V direct currents
Power consumption	Ca. 4 W
Serial interface	RS232, max. Baud rate 38400, ASCII, setting of measuring functions, scaling, measuring time via commands, display of measured values, internal temperature of the device and error code
Fieldbus6	Profinet
Switching output	Programmable switching threshold and hysteresis, "high side" switch, maximum load 0.5 A
Housing material	Aluminum anodized
Size (LxBxH)	187 mm x 96 mm x 50 mm
Weight	850 g
Protection class	IP 65
Shock resistance	10 g / 6 ms (DIN ISO 9022-3-31-01-1)
MTBF	30,000 hours at 25 °C
Mounting	4 drill holes for M6 screws, 100 mm x 85 mm

Annotations to technical data:

1	Dependent on target reflectance, influence of extraneous light and atmospheric conditions
2	Statistical spread of 95 %
3	Measurement on planar, vertical white surface at standstill or in continuous movement, + 15 °C to +30 °C
4	Dependent on target reflectance, influence of extraneous light and atmospheric conditions
5	At a distance of 10 m the beam diameter is 6 mm, at 100 m it is 6 cm

標題：

內容：

聯系人：

聯系電話：

Email：

公司名稱：

聯系地址：

注：1.可以使用快捷鍵Alt+S或Ctrl+Enter發送信息!

2.如有必要,請您留下您的詳細聯系方式!

鄂公網安備 42010502000348號